|
|
|
LYSAGHT TOPSPAN® 61
Product Description and Features
LYSAGHT TOPSPAN® 61 is an economical, lightweight alternative to timber battens or light gauge purlins and girts, depending on size and thicknesses required. LYSAGHT TOPSPAN® 61 is versatile, economical, easily handled and stored simply by stacking.
- Won't burn, warp, twist, splinter or rot and won't be attacked by termites
- Made from high tensile Australian steel
- Fast and easy to install because they can be lapped
- Consistent straightness simplifies alignment
- Fastening is quick and easy with self drilling screws
- Easily stacked, stored and transported
- Can be used as battens for ceilings or roofs, or as light steel sections
Note:
- Store LYSAGHT TOPSPAN® 61 clear of the ground and on a slight slope to ensure draining
- Bundles should not be exposed in the open for extended periods
This search will find the ten closest suppliers for the location you enter, for the selected product. Fill in each of the fields below, then click "SEARCH"
Please note this locator only contains suppliers in AUSTRALIA. If you need suppliers in other countries please contact your local BlueScope Steel office.
Fields marked with * are required
Is LYSAGHT TOPSPAN® 61 available in custom cut lengths?
Yes. though for detailed availability you should refer to your local BlueScope Lysaght branch or distributor. Generally, it is sold as stock lengths of 7500mm.
Why doesn't the LYSAGHT TOPSPAN® profile need bridging?
The main reason for this is the specially engineered shape of the LYSAGHT TOPSPAN® section.
How far can LYSAGHT TOPSPAN® 61 be cantilevered?
The size of the cantilever is 10% of the adjacent internal span, or 350mm, whichever is the lesser. Please note that the LYSAGHT TOPSPAN® 61 must be one continuous length from internal span to the end of the cantilever.
LYSAGHT TOPSPAN® 61 light steel sections are made from ZINCALUME® steel (aluminium/zinc alloy coated) complying with AS1397, G550, AZ150 (550MPa minimum yield stress, 150g/m² minimum coating mass).
| Thickness (BMT, mm): | 0.75, 1.0 | |
| Yield Strength (MPa): | 550 | |
| Coating Mass (g/m²): | 150 | |
| Mass (kg/m) | 0.75 BMT: 1.00 BMT: |
1.18 1.56 |
Schematic
Availability
LYSAGHT TOPSPAN® sections are availabile in all states.
Related Case Studies
FAQs
Is LYSAGHT TOPSPAN® 61 available in custom cut lengths?
Yes. though for detailed availability you should refer to your local BlueScope Lysaght branch or distributor. Generally, it is sold as stock lengths of 7500mm.
Why doesn't the LYSAGHT TOPSPAN® profile need bridging?
The main reason for this is the specially engineered shape of the LYSAGHT TOPSPAN® section.
How far can LYSAGHT TOPSPAN® 61 be cantilevered?
The size of the cantilever is 10% of the adjacent internal span, or 350mm, whichever is the lesser. Please note that the LYSAGHT TOPSPAN® 61 must be one continuous length from internal span to the end of the cantilever.
Specifications
LYSAGHT TOPSPAN® 61 light steel sections are made from ZINCALUME® steel (aluminium/zinc alloy coated) complying with AS1397, G550, AZ150 (550MPa minimum yield stress, 150g/m² minimum coating mass).
| Thickness (BMT, mm): | 0.75, 1.0 | |
| Yield Strength (MPa): | 550 | |
| Coating Mass (g/m²): | 150 | |
| Mass (kg/m) | 0.75 BMT: 1.00 BMT: |
1.18 1.56 |
Schematic
Design
Availability
Availability
LYSAGHT TOPSPAN® sections are availabile in all states.
