Material Compatibility

Contact with or run-off from some materials can damage coated steel products. Buildings can also be susceptible to condensation on inside surfaces. These materials include certain metals, treated timbers and chemicals.

• Don’t allow any direct contact of coated steel products with incompatible materials (see Table: Compatibility of direct contact between metals or alloys)
• Don’t allow discharge of rainwater from incompatible materials onto coated steel products (see Table: Acceptability of drainage from an upper surface to a lower metal surface)
• Ensure that supporting members are compatible with the coated steel products or, alternatively, appropriately coated.

If there are doubts about the compatibility of other products being used, please contact us.

Incompatible materials include:

• Lead
• Copper
• Monel metal
• Bare steel
• Stainless steel (except with SUPERDURA® stainless steel)
• Carbon (in pencils and some rubbers)
• Green or some chemically treated timbers (like CCA or tanalith treatments)
• Materials subject to cycles of dryness and wetness, or which have excessive moisture content (such as improperly seasoned timber)
• Wet and dry concrete
• Soils
• Vegetable matter
• Cleaning agents (e.g. bring cleaning products)
• Any material which will inhibit normal exposure to the atmosphere