Suited for QLD, NSW, ACT, VIC and TAS
General Notes before using this guide:
This Guide has been prepared for a range of designs using LYSAGHT ® products. The information in this guide is suitable for use only in areas N1 (W28) - N3 (W41), and where a tropical cyclone is unlikely to occur as defined in Australian Standard AS4055 Wind Loads on Housing. LYSAGHT LIVING ® kits have been designed as a complete unit.
All erection and connection details to be made in accordance with the relevant standard connection details drawing contained in this Guide.
For all structures in this Guide:
- These designs use CUSTOM ORB®, TRIMDEK®, FLATDEK®, SPANDEK® roofing profiles and FIRMLOK® beams.
- The design allows for the patio cover to be attached on 1 side only or freestanding.
- The design is for attachment to timber frame structure only.
- The design allows for attachment to metal/timber fascia only.
- Post height must not exceed 2700mm from ground.
- Roof pitch of structures are preset at 22.5 degrees
The Skillion Installation Guide, covers the following steps:
Component Assembly Diagram
Components
How to get started
Structure types
Fitting attachment brackets and rear receiver channel
Fitting a headbeam
Fitting return beam - rafter - purlin
Making a stiffened gutter
Fitting of the checked post
Attaching to a slab
Post into footing
FITTING FLATDEK®
FITTING FLATDEK® LIGHT PANELS
Fitting gutter straps
Prepare the downpipe position
For an in-depth explanation on this process, please refer to the Skillion Installation Guide:
